AQOR Adjustable harness options

AQOR Adjustable harness options

The AQOR backplate is made of high-quality 3 mm V4A stainless steel with a refined surface.
The hole spacing is chosen so that accessories from all well-known manufacturers can be used on the AQOR backplate if necessary.
All outer and inner edges and slots are CNC milled with large, round radii, so that harnesses, wings and other accessories are not worn out by sharp edges.
The slightly inclined edges in the lumbar area ensure a comfortable fit and prevent possible pressure points, even with heavy diving equipment.
The lower elongated hole for mounting the bottles allows a certain degree of flexibility in the event that, for example, the spacing of the clamps on borrowed bottles does not fit exactly. The top 3 bottle mounting holes allow for quick fine adjustment of the trim by changing the mounting position of the backplate to one of the other holes.
It is recommended to use the middle hole.
Additional slots enable the direct installation of bottle straps for a mono bottle. The backplate can therefore be used in every area of ​​diving.

The AQOR backplate has all the features that are otherwise only found in higher-priced products.
The AQOR Adjustable Harnes lives up to its name and is probably the most comfortable and well thought-out harness on the market.
The harness can be quickly and individually adjusted to all configurations using the adjustable shoulder straps.
The variety of D-rings allows all kinds of additional equipment to be attached.
The shoulder pads ensure comfortable wearing, and the crotch strap is equipped with an additional neoprene tube to
reduce any wear and tear in the crotch of the suit.

Scope of delivery:

• adjustable harness with D-rings and belt sliders
• Shoulder pads
• Crotch strap
• Neoprene tube for the crotch strap
• Belt buckle
• EDPM rubber loop
• O-ring for attaching the corrugated hose
• AQOR comfort back padding
• Screw set for the back cushion
• Material: V4A
• Thickness: 3mm
• Weight: 2.1 kg (backplate)