Aqor Aluminium backplate – Standard

The AQOR backplate is made of high-quality aluminium with an anodized surface.

The hole spacing is chosen so that accessories from all well-known manufacturers can be used on the AQOR backplate if necessary.

All outer and inner edges and slots are CNC milled with large, round radii, so that harnesses, wings and other accessories are not worn out by sharp edges.

The slightly inclined edges in the lumbar area ensure a comfortable fit and prevent possible pressure points, even with heavy diving equipment. The lower elongated hole for mounting the bottles allows a certain degree of flexibility if, for example, the spacing of the clamps on borrowed bottles does not fit exactly. The top 3 bottle mounting holes allow for quick fine adjustment of the trim by changing the mounting position of the backplate to one of the other holes.

It is recommended to use the middle hole.

Additional slots enable the direct installation of bottle straps for a mono bottle. The backplate can therefore be used in every area of ​​diving.
Due to its low weight, this backplate is ideal when travelling or when weight needs to be saved for other reasons.

The AQOR backplate has all the features that are otherwise only found in higher-priced products.

• Material: anodized aluminium
• Thickness: 3mm
• Weight: 0.710 kg